Blog › Procurement and Process

What Actually Drives the Price of a Bulk T-Shirt Order

Two suppliers can quote the same t-shirt at prices forty percent apart and both be quoting honestly. They are almost never quoting the same product.

Six levers decide the per-piece price of a bulk apparel order. This guide explains what each one does to the number, so you can shape a budget before you ask for a quote and compare quotes that arrive. It covers unit cost on apparel specifically. Planning a per-head gifting budget across product categories is a separate exercise.

Lever one: fabric weight

Fabric is the largest single input in a t-shirt, so GSM moves cost close to proportionally. Moving from 180 to 220 GSM increases fabric consumption by roughly a fifth.

The finished price does not move by a full fifth, because cutting, stitching and branding stay broadly flat regardless of weight. That asymmetry is the most useful thing on this page for a budget holder: the incremental cost of a noticeably better garment is smaller than buyers expect, so specifying down to the lowest possible GSM is usually a false economy on anything meant to be worn more than once.

Lever two: fabric composition and quality

Composition changes cost independently of weight. Combed cotton costs more than carded because the short fibres have been removed, which is why it pilles less and feels smoother. Man-made fibres and yarns are now taxed at 5% following the September 2025 GST rationalisation, down from 18% and 12% respectively, which has narrowed the gap between cotton and synthetic options.

Yarn count matters as much as fibre. A finer yarn at the same GSM produces a denser, smoother fabric and costs more. This is where two quotes at identical stated GSM diverge, and it is why GSM alone is an incomplete specification.

Lever three: colour

Colour affects price in three separate ways, and buyers usually account for only one.

A stock colour is drawn from fabric already dyed and held. A custom colour requires a dedicated dye lot with a mill minimum, which raises both cost and lead time. Dark colours generally cost more than light ones because they consume more dye. And on printing, a dark garment needs a white underbase layer beneath the design, which adds a screen and a pass.

If budget is tight, accepting a stock colour close to your brand shade rather than an exact custom match is usually the single largest saving available that does not compromise the garment.

Lever four: branding method and colour count

Screen printing is charged setup per colour plus a low per-piece rate. Embroidery is charged by stitch count. DTF is charged by print area with no setup. Sublimation is charged per garment.

The consequence is that the same logo costs wildly different amounts depending on method and quantity. A five colour logo screen printed across 300 pieces can carry more setup cost than the garments themselves. The same logo simplified to two colours halves that. Our comparison of bulk apparel branding methods sets out how each is costed and where the crossover points sit.

Lever five: quantity

Quantity works on the fixed costs rather than the variable ones. Screen setup, digitising, pattern making and line changeover are paid once and then spread across however many pieces you order.

Cost elementBehaviourEffect of doubling quantity
FabricVariableRoughly doubles, small bulk discount
Cutting and stitchingMostly variableRoughly doubles
Screen or digitising setupFixedUnchanged, so halves per piece
Pattern making and gradingFixedUnchanged, so halves per piece
Line changeoverFixedUnchanged, so halves per piece
PackingVariableRoughly doubles
FreightSemi-variableLess than doubles

How fixed and variable costs behave as quantity rises

This is why per-piece price falls sharply between 100 and 500 pieces and then flattens. Most of the saving available from volume has already been captured by around 1,000 units on a simple specification.

Lever six: size range, packing and delivery

These three are routinely left out of the brief and routinely change the final invoice.

An unusual size mix costs more, because a supplier quoting an average distribution and then producing a heavily skewed one has bought more fabric than they costed for. Extended sizes beyond a standard range may need separate pattern grading.

Packing is a real cost that is frequently assumed. Bulk packed in cartons is cheapest. Individual polybagging, size stickering, tissue and gift boxing each add labour per piece.

Delivery split is the third. One consignment to one address costs materially less than the same quantity sorted, labelled and shipped to fourteen branches. Put all three in the brief and the quote you accept becomes the invoice you pay.

Reading a quote properly

A quote that states only a garment description and a price is not comparable to anything. Insist that every quote states fibre composition as a percentage, knit construction, GSM with tolerance, branding method, number of colours, size range, packing specification and delivery points.

Once quotes state those things, differences become explicable rather than mysterious. Most apparent price gaps close entirely once you normalise the specification, and the ones that remain usually reflect a genuine difference in yarn quality or in whether a pre-dispatch quality check is included.

Colour fastness is worth asking about explicitly for uniforms, since a fabric that fails against standards such as IS 686:1985 for daylight or IS 767:1988 for water will look correct on delivery and wrong within a season. That failure is invisible in a quote and expensive afterwards.

Where to cut, and where not to

If the budget will not stretch, cut in this order. Reduce print colours first, since it costs nothing in perceived quality. Move from custom to stock colour second. Simplify packing third. Reduce quantity and reorder later fourth.

What not to cut is fabric weight below the point where the garment reads as cheap, and the pre-production sample. The sample is the reference you check delivery against, and orders placed without one are the orders that generate disputes.

The underlying logic is that promotional apparel only returns value while it is being worn. The 2026 ASI Global Advertising Impressions Study found that a typical promotional product generates around 3,300 brand views over its lifetime and that 78% of consumers keep such items because they find them useful. A garment saved into a drawer has a cost per impression of infinity, which makes it the most expensive option on any quote sheet.

Where the cheapest quote hides its saving

When a quote comes in well below the others on an apparently identical brief, the saving is almost always in one of five places, and it is worth asking directly which one.

Fabric weight below the stated GSM is the commonest, and it is verifiable on delivery by weighing a swatch. Carded rather than combed cotton is the second, invisible on a spec sheet but obvious after a few washes when the surface pills. A reduced number of print colours is the third, which changes how the logo looks rather than how the garment performs.

The fourth is the removal of the pre-production sample, which shifts risk onto you without appearing as a line item. The fifth is the pre-dispatch quality check, which is where a supplier saves a day and you inherit a proportion of defective pieces distributed across a workforce.

None of these make a supplier dishonest. They make the quote a different product. The fix is simply to ask which of the five accounts for the gap, and a straight answer tells you a great deal about who you are dealing with.[1][2][3][4]

Frequently asked questions

Why do bulk t-shirt quotes vary so much between suppliers?
Because the quotes are usually for different products. Fabric weight, yarn quality, colour method, branding method and number of print colours all move the price substantially. Normalise the specification across quotes and most of the gap disappears.
What is the biggest factor in the cost of a custom t-shirt?
Fabric, which is the largest single input. GSM moves cost close to proportionally, and composition and yarn count move it further. After fabric, the branding method and number of print colours have the largest effect.
How can I reduce the cost of a 1,000 piece apparel order without losing quality?
Reduce the number of print colours, switch from a custom dyed colour to a close stock colour, simplify packing to bulk cartons, and consolidate delivery to fewer addresses. All four cut cost without touching the garment itself.
Does ordering more always reduce the price per piece?
Up to a point. Fixed costs such as screen setup and pattern making spread across more units, so per-piece price falls sharply between 100 and 500 pieces. Beyond roughly 1,000 units on a simple specification the curve flattens.
Should I always choose the cheapest quote?
Only after confirming it is the same specification. A materially cheaper quote usually reflects lower GSM, carded rather than combed cotton, fewer print colours, or the removal of a pre-dispatch quality check. Ask which.
Does GST affect the price of corporate apparel?
Yes. Following the 56th GST Council recommendations of September 2025, readymade garments attract 5% GST up to ₹2,500 per piece, and man-made fibres and yarns were reduced to 5%. Confirm current rates and your own input credit position with your tax adviser.

Related pages

Sources

  1. pib.gov.in ↩
  2. prnewswire.com ↩
  3. law.resource.org ↩
  4. law.resource.org ↩