Blog › Procurement and Process

What Is the Minimum Order Quantity for Custom T-Shirts and Uniforms in India?

Most manufacturers in India will quote a minimum order quantity somewhere between 50 and 500 pieces for custom apparel, and the number moves with the product and the branding method rather than sitting at one fixed figure. Embroidered polos can often run from around 50 pieces. Screen printed t-shirts usually need a few hundred before the economics work. Stitched uniforms in a custom pattern sit higher again.

That range is the honest answer. This guide explains what drives it, so you can tell the difference between a real production constraint and a supplier who simply does not want your order.

Why minimum order quantities exist at all

A minimum order quantity is not a sales tactic. It is the point below which a production run costs more to set up than the goods are worth.

Four fixed costs drive it. Fabric is bought and dyed in batches, and a dye lot has a practical minimum below which a mill will not run a custom colour. Cutting requires the fabric to be laid up in plies, and laying up forty pieces takes nearly as long as laying up four hundred. Screen printing incurs a setup charge per colour regardless of quantity. And a production line changeover, moving from one style to the next, consumes machine time that has to be recovered across the order.

Spread those fixed costs over 1,000 pieces and they disappear into the per-unit price. Spread them over 40 and they dominate it.

How the minimum changes by product and method

Product and methodTypical minimumWhat drives it
Embroidered polo or t-shirt, stock fabric50 to 100Digitising is a one-off cost, then per-piece stitching
Screen printed t-shirt, 1 to 2 colours200 to 500Screen setup charged per colour
Screen printed t-shirt, 4 or more colours500 and aboveSetup multiplies with each colour
DTF printed t-shirt1 to 50No setup charge, so small runs are viable
Custom colour fabric, any garment300 to 1,000Dye lot minimum at the mill
Stitched uniform, custom pattern100 to 300Pattern making and grading across sizes
Caps, embroidered100 to 200Panel sourcing and embroidery setup
Jute or cotton bags, printed500 and aboveFabric sourcing and screen setup

Typical minimum order quantities in India by product and branding method

The pattern in that table is worth naming. The methods with a per-piece cost and no setup, such as embroidery and DTF, have low minimums. The methods with a large fixed setup, such as screen printing and custom dyeing, have high ones. If your quantity is small, choosing the right branding method matters more than negotiating the minimum.

What changes the minimum in your favour

Three things reliably bring a minimum down. Accepting a stock fabric colour rather than a custom dye removes the dye lot constraint entirely, and it is usually the single largest lever.

Simplifying the artwork to fewer colours cuts screen setup proportionally. A two colour logo instead of five can move a screen printed order from uneconomic to straightforward at the same quantity.

Consolidating across the business is the third. Four departments each ordering 150 pieces separately will each pay setup. The same 600 pieces ordered together pay it once. For companies that order apparel repeatedly through the year, an annual consolidated order is almost always materially cheaper than four reactive ones.

When a low minimum should worry you

A supplier quoting a very low minimum on a screen printed custom colour order is telling you something, and it is usually one of two things.

Either they are absorbing the setup and recovering it in a per-piece price you have not compared properly, which is fine if you understand it, or they are not manufacturing at all and are sourcing your order from someone who runs it alongside other work. The second is common and not inherently a problem, but it does mean the fabric, the dye lot and the production line are outside your supplier's control. Understanding which model you are dealing with matters more than the minimum itself.

How to plan around a minimum you cannot meet

If your requirement genuinely sits below a viable run, there are three practical routes. Use a stock garment with DTF or embroidered branding, which removes the fabric and screen constraints and works from very small quantities. Order to the minimum and hold the balance as stock for new joiners, which is often sensible for uniforms since the surplus gets consumed anyway. Or wait and consolidate with the next requirement.

What does not work is pressing a manufacturer to run below their minimum. The order will either be quoted at a price that reflects the true setup cost, which usually surprises the buyer, or accepted and then deprioritised behind commercially sensible work.

What to tell a supplier when you ask

Asking what is your MOQ produces a defensive number. Asking a specific question produces a useful one.

Give the product, the approximate quantity, whether you need a specific colour or can work from stock, the branding method if you know it, and your deadline. A manufacturer can then tell you whether your order is viable as specified, and more usefully, what single change would make it viable if it is not.

At Blossoms, minimums vary by product and branding method rather than sitting at one blanket figure, and the business is set up for bulk supply. Where a requirement falls below a viable production run, we say so rather than quoting it badly, because an order run reluctantly is worse for both sides than an honest redirection.

Why the specification matters more than the minimum

Buyers focus on minimums because it is the first obstacle they hit. In practice it is rarely the thing that decides whether an order was worth placing.

The 2026 ASI Global Advertising Impressions Study, based on surveys of nearly 5,000 consumers, found that 78% of people keep promotional products because they find them useful, and that a typical item generates around 3,300 brand views over its lifetime at an average cost of $0.006 per impression. Apparel is the largest category in the industry at 16.1% of spending.

Those impressions accrue only if the garment gets worn. A minimum order met with a poorly specified garment produces a warehouse of unworn stock. Meeting the minimum is a procurement problem. Specifying something people wear is the one that determines whether the spend returns anything.

Minimums for reorders and top-ups

Reorders behave differently from first orders, and buyers are often surprised in both directions. The setup costs that drove the original minimum, digitising and screen preparation, are already paid, so a top-up of the same design in the same colour can often run at a much lower quantity than the original.

The constraint that replaces it is fabric. If the original order used a custom dyed colour, a small top-up cannot economically justify a new dye lot, and a new lot will not match the first exactly. That is why uniform programmes are usually better served by booking the full fabric quantity at the first order and holding the balance, rather than reordering in small batches across a year.

When you place a first order, ask two questions that cost nothing: what is the reorder minimum for this exact specification, and will you retain a reference swatch. The answers determine what your options look like in eight months.[1][2][3]

Frequently asked questions

What is the minimum order quantity for custom printed t-shirts in India?
Typically 200 to 500 pieces for screen printed t-shirts, because screen setup is charged per colour. Embroidered garments often start around 50 to 100 pieces, and DTF printing can run from very small quantities because it carries no setup charge.
Can I order 100 branded t-shirts?
Yes, but the branding method decides the cost. At 100 pieces, embroidery or DTF will be far more economical than screen printing, because screen setup would be spread across too few units. Using a stock fabric colour rather than a custom dye also keeps it viable.
Why do promotional product suppliers have minimum order quantities?
Because fabric is dyed in batches with a mill minimum, cutting takes similar time regardless of quantity, screen printing carries a setup cost per colour, and each production line changeover consumes machine time. Those fixed costs have to be recovered across the order.
How can I reduce the minimum order quantity?
Accept a stock fabric colour instead of a custom dye, reduce the number of print colours, switch to embroidery or DTF branding, or consolidate requirements from several departments into one order so setup is paid once rather than repeatedly.
Is the minimum order quantity different for uniforms?
Usually higher for a custom stitched pattern, often 100 to 300 pieces, because pattern making and size grading are fixed costs. Uniforms built on a stock garment with added branding follow the same minimums as t-shirts and polos.
What happens if my order is below the supplier's minimum?
A good manufacturer will tell you directly and suggest what would make it viable, such as changing the branding method or using stock fabric. Pressing a supplier to run below their minimum usually results in either a surprising price or an order that gets deprioritised.

Related pages

Sources

  1. prnewswire.com ↩
  2. members.asicentral.com ↩
  3. ibef.org ↩